| Experience: Request More Info |
| · Over 25 years of spray drying glasses, ceramics, catalysts, dyes, mold powders, detergents, metallic powders, and many more industrial products. |
| Equipment and Capacity: |
| · Two 24 ft. diameter APV Anhydro spray dryer units
· Water evaporation rate of 1240 lbs. per hour at an inlet temperature of 565ºF and an outlet temperature of 285ºF · Maximum inlet temperature of 800ºF · 4,000 lbs. per hour maximum achievable throughput · Cyclone and baghouse fine particle separation technology · Co-current and mixed flow drying capability · 6 ft. diameter lab unit for pre-production testing |
| Atomization: |
|
· Multiple high pressure nozzles
· Two fluid nozzle · Variable speed rotary disc (maximum speed of 12,000 RPM) |
| Facility: |
|
· Variety of milling and blending capabilities
· More than 12,000 gallon holding and mixing tanks · Ample staging areas for batching · Large warehousing capacity · Products accepted in all forms including tankers, drums, bulk bags, etc. · Hazardous material handling experience · In-process and post process rental equipment available · Complete wastewater management system for separation of solids and pH adjustment |
| Product Quality Analysis: |
|
· Complete quality and in-process product analysis including sieve, free moisture,
and bulk density
· Sympatec Helos wet or dry laser particle size analysis · Halogen moisture analyzers · Accumeritics helium pyncnometer · Quantitative analysis available through scanning electron microscopy with EDS capability |
| Contacts: |
|
· Terry McCormick, Executive Vice President - 912/880-3061
· Andreas Argentinis, Vice President -Sales and MArketing- 912/880-3065 |
